New Items

    To furnish the diverse requirements of our clients in the best possible manner we are involved in offering an extensive range ofToy Testing Equipment 

Application :-
Used to measure length for the ropes, chains or wires on toys
Test Method:-
Fix one end of the cord or chain and apply a force of (25 ± 2) N to the other end
along the axis of the cord or chain. Measure, to an accuracy of ± 1 mm, the length
of the cord or chain from the fixing point to the end of the cord or chain. If the
fixing point has the same shape or form as the cord or chain, this part is measured
as part of the entire cord or chain .

Application :-
Apply to test the strength of toy scooter steering tubes, including resistance to
downward forces and resistance to upward forces.
Technical Specifications
Control mode Touching screen control
(25±0.2)kg
(50±0.5)kg
(100±1)kg
Dimension 1200×1000×1700mm
Weight 170kg

Application :-
The instruments applies to test the durability of box cover. it uses fixtures to drive
the box cover move, after simulating a certain number and closing movements.
Check whether the toy lid hinge parts function are in good condition.
Standards :-
Subject the lid to 7000 opening-and-closing cycles, where one cycle consists of raising
the lid from its fully closed to its fully open position and returning it to fully closed. To
prevent undue stress on screws or other fasteners used to attach the lid support
mechanism, care should be taken not to force the lid beyond its normal arc of travel.
Complete a cycle of about 15s, 7000 times cycle should be completed within 72h, and
then check the lid and the lid support mechanism is intact or not.
GB 6675.2 section 5.13.2.2
ISO
Standards
ASTM
EN
GB
ASTM F834 section 5.1
EN-71-1 section 8.31.3
ISO 8124-1 section 5.13.2.2
Model RT-R02
Specimen quantity 1pc / time
Test speed (approx.).15s / cycle
Swinging rod rotation angle 0°~90°
Test times 7000times
Counter 0~999999 times, can be set
Sample max height 70cm
Display mode LCD
Drive mode Cylinder drive
Action mode Stop automatically
Power supply 1∮ AC 220V 50/60Hz
Dimensions(W x D x H) 360 x 350 x 1250 mm
Weight Approx. 25kg

Specification:

• Polyester Makeweight - 20x20cm 1 kg pack
• Polyester Makeweight - 30x30cm 1 kg pack
• Cotton Makeweight - 92x92cm 1.6 kg pack
• Cotton/Polyester Makeweight 50/50 92x92cm 1.3 kg pack
• Wool/Cotton Makeweight - 80/20 - 30x30cm 0.7 kg pack
• Testing Categories: Colour Fastness, Dimensional Stability, Physical

 

The Ci7500 is a brand-new sphere spectrophotometer addressing the needs of lab and QC professionals who primarily work with opaque materials. It brings the level of reliability, traceability and accuracy that our customers expect from an X-Rite benchtop solution.

A widely used method for determination of stiffness of fabric is cantilevertest method.

The Water Proof is conceived to analyse the water permeability under static and dynamic testing conditions of a wide range of textile materials. It indicates and displays the water column pressure at the moment in which the first water drops appear on the fabric’s surface

Digital Portable Moisture Meter measures moisture by sensing the Electrical resistance of the hygroscopic material. The sesing can be done with one of the five types of sensors.

   To furnish the diverse requirements of our clients in the best possible manner we are involved in offering an extensive range ofTextile Testing Instruments

Application
To determine the strength of the bond between the
sole and upper at the toe and heel area of the lasted
margin of completed footwear. The method is mainly
applicable to stuck-on or moulded-on constructions
with an extended sole edge.
Principle
A thin rectangular steel plate with an arc shaped cut-out is connected to a force measuring system. The arc
shape is positioned on top of the extended edge of the sole of the test footwear at either the toe or heel. The
wearing surface of the sole is brought into contact with a fulcrum which is a fixed distance from the center of
the arc. The footwear is then rotated by hand about the fulcrum and the force applied by the steel plate
which is necessary to separate the upper from the sole is measured . The test may also be non-destructive by
applying a set maximum force and checking for failure of the bond.

Dyeing is one of the most important processes to which the woven fabric is subjected to in processing. During dyeing operation a very specific conditions should be maintained in order to ensure the fixation of dye molecules to the fabric. It is most suited for fabric made out from natural fibre. Open Bath / Water Bath dyeing equipment is being used for sample dyeing of fabric and yarn by textile manufacturers. It is highly cost effective and provides quick results which are required for sample dyeing.

Features of Open Bath/Water Bath:

• Open Bath/Water Bath are fabricated out of 304 quality  stainless steel.
• Beaker body and lid made of 316 quality stainless steel.
• Buzzer to indicate the completion of the process cycle or step.
• Equipped with controller in order to control Time v/s Temperature profile.

Specifications:

• Capacity    Max.12 Beakers
• Capacity of Beaker    500 ml.
• Temperature    Maximum operating Temperature 100º
• Maximum rate of heating    3.5ºC/Min.
• Electric Supply    Single phase 220 Volts, AC Supply
• Heater Supply    Through 3 Kw Immersion Heater
• Medium used for Heating    Water
• Electrical Supply    1 Phase
• Overall dimensions of the Unit    24” (W) x 16” (D) x 12”mm (H)
• Net Weight of the Unit    27 Kgs. with 12 Beakers

Peel Bond Strength Digital Tester is the average load per unit width of bond line required to separate bonded materials where the angle of separation may be 90° or 180°.

This tester is used for determining the resistance of
leather, artificial leather, fabric and so on footwear
upper material to water penetration on flexing, in
order to assess the suitability for the end use.

Precise, Consistent Sample Measurement With older bench top spectrophotometers, it can be difficult to determine precisely which area on the sample will be measured, resulting in wasted time with trial and error measurements. Use the next-generation X-Rite benchtop spectrophotometer Ci7800, a master instrument, and the Ci7600, the cost effective compatible version. Use in combination.

Specification:

• Consistent and precise presentation samples for accurate sample-to-sample measurement.
• Fast measurement and comparison of samples of varying sizes.
• An audit trail that includes device condition, sample image, and parameters at the time of measurement.
• Multi-aperture design to accommodate measurement of complicated samples.

• Delivery Time: Ready Stocks.

The Ci4100 sets the new standard for performance and features in an easy to use compact sphere counter top solution for retail paint matching to implement a higher degree of formulation accuracy.A reliable and accurate counter top spectrophotometer that serves as the foundation for operations, the Ci4100 improves speed and accuracy of paint formulation, provides easy sample targeting and stands up to the harsh retail environment.

• Delivery Time: Ready Stocks.

It has been specially designed to evaluate the impact resistance of plastics. The equipment works on the principle of the pendulum method. IZOD/Charpy Impact Tester is a consistent tool to measure the impact resistance of materials under sudden falling force or impact The test instrument covers two tests, namely. Izod (horizontal impact on vertically clamped specimen) Charpy (vertical impact on the horizontally placed specimen).

The Izod/Charpy Impact test is significant in testing and evaluating the impact resistance of various plastic products. The test is used to determine the energy that is required to break a standard test specimen using the pendulum method. This highly reliable instrument is a must for all plastic testing laboratories and quality control departments.

Izod/Charpy Impact Tester reveals the impact strength in terms of J/m. This tester is used to designed to check the impact strength of plastics.

Specification:

• Rigid designs of instrument frame & other parts assure minimum energy absorption during fracture which results in improved test accuracies
• The highly strained & wearing parts like support blocks & strikers are of special alloy steels duly heat treated
• Initial potential energy for Charpy is 300 Joules & for Izod is 170 Joules with a Least Count of 2 Joules (for Analogue models) & resolution of 0.5 Joules (for Digital Model)
• ASTM Impact Testing machine is also provided, which conforms to E-23 ASTM standard
• Gauges, Tongs, Sub-zero bath, Templates, U & V Notch milling cutters are available with it (Optional)

Drop Tester will provide data digitizing and analyzing of your drop and striking while the products in transportation. The testing data will help you improve the packing and buffer materials. The packaged drop test is applied to test the anti-vibration & covering capability of packaging material and the sufficiency of product impact-resisting capability regarding packaged products. And use the test result to determine how to improve the packaging design.

Four perforated racks gives enough space to condition samples properly powder coated thick paint for long life. Mild steel body, Most useful instruments for all test for pre conditioning the sample.

The binocular microscopeis an essential part of the modern lab for inspection and verification of fibers and yarn. The binocular head is inclined at 45 rotating 360 and can be locked in any position. Low and high powered objectives are selected by rotating the nosepiece through 90 degrees having parfocal magnifications.

Specification:

• Eyepiece(10X): Field Number : 20(anti-fungus)
• 45 degree inclined,
• 360 degree rotatable
• Parfocal 4x, 10x, 40x(spring), 100x(Oil, Spring)
• Eye Pieces WF 10x (FN 18mm)

     To furnish the diverse requirements of our clients in the best possible manner we are involved in offering an extensive range ofPlastic Testing Instruments

In order to famous in this domain, we offer a wide range of Textile Testing Instruments Calibration Service. The provided service is rendered by domain experts using excellent quality inputs. Owing to its reasonable price, flawless execution, and perfect work, this service is valued by our honored clients.

Other Details:

• As par with industry standards
• On-time completion
• Total client contentment
• Close coordination with clients

Yarn Digital Microscope 191G Stereoscopic microscope with a binocular head frame, particularly indicated for the fabric and yarn analysis.Standard magnification from 7X to 45X. Incident and transmitted illumination.

Optional:

• Pair of oculars 20X and additional lens 2X Code 191.66
• permit to have a maximum of 180 enlargements Code 191.70
• Additional lens 0.5X permits to halve the standard magnification Code 191.64
• Adaptor for Reflex type camera(T2 pring not supplied) Code 191.68

Application
This is used to determine the propensity for materials to
crack or otherwise fail at flexing creases, but can also be
used to assess whether leathers are likely to produce salt
spue. In particular the test simulates conditions in the
vamp part of footwear during walking. The test can be
conducted with either wet or dry specimens at room
temperature. The method is applicable to all flexible
materials and in particular those used to manufacture
outers and linings of footwear uppers such as leathers,
coated fabrics and textiles.
Principle
A square specimen of the material is folded over two inverted V-shaped clamps. The clamps are able to
move relative to one another so that as they become closer the specimen is flexed to produce one
downward crease surrounded by four upward creases. During the test the clamps oscillate at a constant
speed so that the specimen is repeatedly flexed. After a predetermined number of cycles the test is stopped
and the specimen is visually examined for signs of damage or salt sque.

Scorch Sublimation Tester to determine fabrics Ironing color fastness and sublimation color fastness, and dimensional stability under hot dry conditions.Heating plate temperature and test time are adjustable, fitted with microprocessor temperature controller and the top plate with precisely controlled weight. The independent heating plate ensures controlling test temperature and thickness of sample individually.

Specification:

• Large LCD display, convenient setting, and operation.
• 3 pairs of heating plates, heating temperature of each upper and lower plate can be set individually.
• Each heating plate can be set heating ON or heating OFF.
• Timer: 1 ~ 249s, automatically stops heating and alarms
• Temp. Accuracy: +/- 2 Deg. C
• Pressure: 4kPa+/-1k
• Heating temp. control mode: Individual control for each top and bottom plate.

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A,Other

Features:

• RAMP Foot Comprising precisely machined flat surface
• Indenter Point Constructed using hardened alloy steel that is precision ground as per defined standards
• Indicating Dial that is graduated from 0 to 100 divisions where 0 denotes lowest and 100 highest hardness degree
• Comes with support of check gauge

Applications:

• Vulcanized Rubber
• Plastic
• Ebonite
• Fiber
• Other soft and hard Elastomers

Specifications:

• DIN 53505
• ASTM D 2240
• ISO 7619
• JISK 6253