Toy Testing Equipment

To simulate the subjecting of a toy to mechanical damage through compressing or other action likely to be performed by a child. After testing, the toy may be tested for sharp edges, sharp points & small parts.

A fine equipment to check the reed/pick of any type of fabric conviently and accurately. The equipment 40X travailling microscope with in built references line to count the number of  threads.

Application :-
It’s auxiliary tools for measuring perimeter for ropes and chains, so as to
determine whether length of ropes
complies with safety requirements.
Technical Specifications
Compose 2 rectangle test block
Material Aluminium alloy
Test load (25±2)N
Dimensions (L x W x H) 94 x 25 x 25mm
Weight 0.5 kg

Application :-
This test instrument is mainly used to test the dynamic strength of wheeled ride-on
toys. Can simulate driven toys vertically hit the inelastic step in a steady speed of
2m /S ± 0.2 /S, then observe the damaged condition. Applied to toy bicycles,
scooters, roller-skate and etc.

Application :-
Determine that metal or glass edges on toys and other articles intended for use
by children under 8 years of age, and such edges exposed in normal use or as a
result of reasonably for seeable damage or abuse of such toys and articles,
present a potential risk of injury by laceration or avulsion.
Test Method :-
Glass toys or components, accessible edge of toys, packaging shell of toys driving
mechanism, hard materials covering face (like protective eyeglasses, space helmet
or helmet shield), toys of affordable children’ weight(toys car, ice skates, etc.)

Application :-
To determinate that points on toys and other articles intended for use by
children under 8 years of age, and such points exposed in normal use or as a
result of reasonably foreseeable damage or abuse of such toys and articles,
present a potential risk of injury by puncture or laceration.
Test Method :-
Glass toys or components, toys sharp point and metal wires, protrusion on toys,
packaging shell of toys driving mechanism, hard materials covering face (like
protective eyeglasses, space helmet or helmet shield), toys of affordable children’
weight(toys car, ice skates, etc.)
Test Principle :-
The device has a slot with 0.04 inches width and 0.045 inches long rectangular
opening, the two reference sizes sharpness are inserted into the depth of 0.015 inches
deep hole of the sensor head. And overcome the spring of 0.5 pound elastic to cause
the sensor head to move 0.005 inches again. That was identified as sharp point.

Application :-
This machine is used to detect the maximum kinetic energy generated by the fired
bullets of Projectile toys or the launched bows, thereby to determine whether the toy
projectiles would harm the child.
Feature :--
Application :-
This machine is used to detect the maximum kinetic energy generated by the fired
bullets of Projectile toys or the launched bows, thereby to determine whether the toy
projectiles would harm the child.
Configured large color screen, can display a graph of five tests.
This machine configured with two measurement channels, inner and outer
sensor channel, adapt to the testing of different sizes toys.
The use of microcomputer control, can input the weight of the tested object,
sensor spacing and etc., automatically calculates the test speed, kinetic energy,
the maximum and average value.
Configure thermal printer, can print the experimental result.

Application :-
The instruments applies to test the durability of box cover. it uses fixtures to drive
the box cover move, after simulating a certain number and closing movements.
Check whether the toy lid hinge parts function are in good condition.
Standards :-
Subject the lid to 7000 opening-and-closing cycles, where one cycle consists of raising
the lid from its fully closed to its fully open position and returning it to fully closed. To
prevent undue stress on screws or other fasteners used to attach the lid support
mechanism, care should be taken not to force the lid beyond its normal arc of travel.
Complete a cycle of about 15s, 7000 times cycle should be completed within 72h, and
then check the lid and the lid support mechanism is intact or not.
GB 6675.2 section 5.13.2.2
ISO
Standards
ASTM
EN
GB
ASTM F834 section 5.1
EN-71-1 section 8.31.3
ISO 8124-1 section 5.13.2.2
Model RT-R02
Specimen quantity 1pc / time
Test speed (approx.).15s / cycle
Swinging rod rotation angle 0°~90°
Test times 7000times
Counter 0~999999 times, can be set
Sample max height 70cm
Display mode LCD
Drive mode Cylinder drive
Action mode Stop automatically
Power supply 1∮ AC 220V 50/60Hz
Dimensions(W x D x H) 360 x 350 x 1250 mm
Weight Approx. 25kg

    To furnish the diverse requirements of our clients in the best possible manner we are involved in offering an extensive range ofToy Testing Equipment 

Application :-
Used to measure length for the ropes, chains or wires on toys
Test Method:-
Fix one end of the cord or chain and apply a force of (25 ± 2) N to the other end
along the axis of the cord or chain. Measure, to an accuracy of ± 1 mm, the length
of the cord or chain from the fixing point to the end of the cord or chain. If the
fixing point has the same shape or form as the cord or chain, this part is measured
as part of the entire cord or chain .

Application :-
Apply to test the strength of toy scooter steering tubes, including resistance to
downward forces and resistance to upward forces.
Technical Specifications
Control mode Touching screen control
(25±0.2)kg
(50±0.5)kg
(100±1)kg
Dimension 1200×1000×1700mm
Weight 170kg

Application :-
Mainly used to test the inflaming retarding performance for solid and soft toys
according to ASTM standard. Soft toy: any stuffed or plush toy, that may or may
not be parts or components of other toys. Solids: toys or toy parts constructed of
rigid, flexible, or pliable solids.

Application :-
For this instrument, the tilt angle of the ramp is adjustable. The angle
adjustment range is 0 ~ 45degree. Can be used to assist test the locking
device of collapsible toys, the stability of toys, the brake performance of
ride-on toys, etc., need to used with specified weight.
Test Range:-
Glass toy or parts, toy or parts of expansion material, toy drive encapsulation shell,
all the hard material masking on the face( goggles, a space helmet or welding
mask), hard ball toy, the magnetic components can be reached of toy, the toys
attached to the food, rattle toys and seams of plastic similar to toys.

Application :-
Applicable for measuring magnetic induction intensity of all kinds of magnetic
field, including DC magnetic field, AC magnetic field, etc. Portable, wide
measuring range, easy operation and clear liquid crystal display.
Feature:-
Surface magnetic field of permanent magnetic material, DC motor, loudspeaker,
magnetic separator, Permanent magnetic separators, etc.
Also can be used to measure the materials’ residual magnetic after mechanical
processing, magnetic pole distribution, products’ residual field after
demagnetization, and control electro with magnetic situation, measure the motor
magnetic and leakage flux of electromagnetic field.

 

Noise & Echo sound reach-in testing chambers offer highly precise and reproducible conditions for testing in many industries. Ideal for research and development studies, quality control, production facilities and laboratory testing, the chambers offer the ideal solution for Noise and Echo sound testing, simulation and exposure to Sound, Noise Changes, Echo and Sonic or Super Sonic Sound testing.

Our product range includes:

·        Muffler Noise Testing Chamber 

·        Mobile Phone Speaker Testing Chamber 

·        Mobile Phone Mic Testing Chamber 

·        Electric Motor Sound Testing Chamber 

·        Fan Sound Testing Chamber

·        Toy Sound Testing Chamber

 

RAMP Audiometric booth integrate superb acoustics and ergonomics to create an ideal testing environment for a range of clinical and research procedures. Our broad selection of audiology rooms and suites offer clinicians and researchers an array of choices, all custom configurable, for which to select the ideal acoustic environment for their specific needs.   

Designed and constructed using the same acoustic expertise incorporated into our audiometric rooms RAMP’S recording studios and voiceover rooms significantly reduce external ambient noise to create a quiet and comfortable  atmosphere for professional sound engineering and recording. 

STANDERD ROOMS
Audiomertric booth are the standard of the industry. These premium quality, The ready made booth are available in eight standard sizes, and offer a range of options. Designed for a wide array of audiological and hearing research applications. The rooms provide unsurpassed value for their combination of price and performance.

Design
Audiometric booth are designed and built with superb acoustic characteristics to maximize external noise isolation and create a testing environment ideally suited for clinical level audiological exams. The walls, ceilings, and floor panels of all audiometric rooms are STC rated to provide outstanding acoustic performance within the rooms and can be upgraded to a double-wall design for high ambient noise applications.

The audiometric booth are comfortable and easy to use. The interiors are spacious and healthy enviroment, and if additional space is necessary, a two-room suite design is available. 

Available with a wide selection of interior and exterior finishes the series can be custom designed to fit the desired aesthetic of any setting. 

Applications   
Ramp’s Audiometric booth are used for all audiological measurement applications including audiology labs, hospitals, clinics, hearing aid providers, research institutes, and teaching facilities.

It has been specially designed to evaluate the impact resistance of plastics. The equipment works on the principle of the pendulum method. IZOD/Charpy Impact Tester is a consistent tool to measure the impact resistance of materials under sudden falling force or impact The test instrument covers two tests, namely. Izod (horizontal impact on vertically clamped specimen) Charpy (vertical impact on the horizontally placed specimen).

The Izod/Charpy Impact test is significant in testing and evaluating the impact resistance of various plastic products. The test is used to determine the energy that is required to break a standard test specimen using the pendulum method. This highly reliable instrument is a must for all plastic testing laboratories and quality control departments.

Izod/Charpy Impact Tester reveals the impact strength in terms of J/m. This tester is used to designed to check the impact strength of plastics.

Specification:

• Rigid designs of instrument frame & other parts assure minimum energy absorption during fracture which results in improved test accuracies
• The highly strained & wearing parts like support blocks & strikers are of special alloy steels duly heat treated
• Initial potential energy for Charpy is 300 Joules & for Izod is 170 Joules with a Least Count of 2 Joules (for Analogue models) & resolution of 0.5 Joules (for Digital Model)
• ASTM Impact Testing machine is also provided, which conforms to E-23 ASTM standard
• Gauges, Tongs, Sub-zero bath, Templates, U & V Notch milling cutters are available with it (Optional)

Drop Tester will provide data digitizing and analyzing of your drop and striking while the products in transportation. The testing data will help you improve the packing and buffer materials. The packaged drop test is applied to test the anti-vibration & covering capability of packaging material and the sufficiency of product impact-resisting capability regarding packaged products. And use the test result to determine how to improve the packaging design.

Application :-
Small ball test fixture (Template C) is use to examine a toy up of whether small ball
accessories may result in the child swallow, stop breath way and esophagus to
cause choking danger or not. mainly used to test suction cups toy and ball toy or
toys parts..
Test Method :-
Position and clamp Template C so that the axis of the slot is substantially vertical and
the slot is unobstructed at its top and bottom openings.
Place the ball or the suction cup or the toy with an attached suction cup without
compressing it, in any orientation in the slot so that the force on the ball or suction cup
or toy with an attached suction cup is only the force due to its mass.
Determine whether the ball or suction cup or toy with an attached suction cup passes
entirely through Template C.

• Minimum Order Quantity: 1 Nos