Fabric Testing Instruments

Digital Bursting Strength Tester of knitted/ woven/ non woven fabric and card board. Digital Display of the Burst pressure with Manual clamping. Load cell 35kg x 100 gm. Renewable Rubber Diaphragm pressured by Glycerin Fluid. Diaphragm correction facility with emergency stop. Optional: load cell 70kg and calibration foil. Textile fabrics having no particular direction cannot be tested for its strength on a tensile tester; a multi directional force generated by hydro static pressure is applied on fabric to check the strength of that fabric, this phenomenon is called bursting strength testing.

• Specially designed instrument to determine the tensile strength of yarn.
• Maximum Capacity 10 kg with 1gm Accuracy.
• The equipment works on CRE principle.
• With User-Friendly Digital Control Panel.
• Maximum Jaw Separation 600mm & Minimum Jaw Separation 25mm.
• Control Panel has Peak & Zero Setting Option.
• Complete with all Accessories.

Application
This machine was use to do a variety of zipper
reciprocating tests, by tests in a continuous back and
forth action, the ultimate aim is to test the zipper
created a distance between joints, loose or
connector failure, fluff, wear, etc.
Feature
Reasonable design, easy to operate
Equip with automatic counting device to complete test and automatically machine stop.

The Equipment is used for testing the transference of color from the surface of one material to another by either wet or dry rubbing. Specimens are rubbed with dry, standard cotton cloth (Crocking cloth) and again, if applicable, with a wet cloth.

Specification:

• Diameter of Rubbing Finger – 16 mm
• Force on rubbing finger – 9N ( 917.43 g)
• Traverse of rubbing finger
• Ergonomic design for easy operation and maintenance

The Tearing Strength Tester of fabrics, or other similar materials is determined by measurement of the work done in tearing through a fixed length of test specimen using the Elmendorf Tear Tester.

To determine the Color Fastness and degradation due to the effects of sunlight on Textiles. The unit is supplied with 500 watts. MBTL Lamp (Mercury Blended Tungsten Lamp), Digital Pre-settable Timer for controlling duration of Test, Hour Totaliser for Lamp running duration, 3 Nos. Water cooled Rectangular Specimen Holders, 50 Nos. Type C Cylindrical Specimen Holders, Control Fluid Filler, Grey Scale for Change in Colour, One set of Blue Wool Light Fastness estandares, automatic Voltage, Stabilizer, Plastic tubing's, S.Steel Clamps, Special Stainless Steel water Circulation Unit.

Complete Unit with a Calibration Certificate, Traceable to NPL, along with an Inspection and Conformance certificate.

Specification:

• MBTL Lamp (500 Watts) - 1 Nos.
• Digital Pre-settable Timer (for Controlling duration of Test)
• Hour Totaliser (for Lamp running duration)
• Water Cooled Rectangular Specimen Holders - 3 Nos.
• Type C Cylindrical Specimen Holders - 50 Nos.
• Control Fluid Filler-1 No.
• Grey Scale for Change in Colour-1 No.
• Blue Wool Light Fastness Standards -1 Set
• Automatic Voltage Stabilizer-1 No.

Technical Specification:

To determine the burning characteristics of textile with the digital resettable timer. made of stainless steel. Supplied with the complete range of accessories.

Product Details:Features:

• Highly functioning and optimum performance based Colour Matching Cabinets
• System made available with Rocker Switch Control for better control over involved operations
• Used for colour matching under different light sources
• Finding suitability for all industry sectors where colour matching is critical part of quality control
• System featuring German make Hour Meter for recording cumulative usage
• System coming supplied with 45° Angle Viewing Stand, Dust Cover and Calibration/Conformance Certificate

Other Details:

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A,Other
• Delivery Time: 1 Week

Washometer Machine is used for determining colour fastness of textile materials to washing. This is attained by Mechanical agitating a specimen of textile in contact with pieces of specified adjacent fabrics in a soap-soda solution, before being rinsed and dried. The change in colour of the specimen and staining of the adjacent fabrics are assessed with standard gray scales.

Product Details: Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Snap Button Pullout Tester. Owing to its remarkable quality, the offered testers are highly applauded by our clients. Provided range is precisely designed by our expert professionals using excellent quality material and advanced technology. Moreover, we check the offered testers on various quality parameters to provide a flawless dispatch from our end.

Features:

• This test method cover an uniform force required to pull a snap attachment perpendicular to the garment. The snap attachment is not forced to separate from the garment. This method is required attachment of snaps to specimens using specifications provided by the producers of the snaps. This test method is used to establish correlation to wear conditions and for comparing different brands and types of snap fasteners
• Compact size
• Superior finish
• Sturdiness

Other Details:

• ASTM Designation: D4846 88
• Standard Test Method for Resistance to Unsnapping of Snap Fasteners Consumer Products Safety Commission
• ASTM Designation: D1776ASTM PS79-96

The Ramp Digital Tensile Strength Tester is electrically operated and is used to check the Physical impurities. It is basically vertical type, to limit the travelling range.

Specification:

•     Capacity of Tester with Accuracy of 100g: 250 Kg and 500 Kg
•     S Type Load Cell fixed with Top Grip
•     Top Grip is fixed and Bottom Grip is Movable Type
•     Elongation measurement by Steel Scale and Digital Counter Meter Both
•     Digital Display of Load and Elongation
•     Peak Value of the Last test can be read
•     User-friendly key panel with switch of Zero setting and peak value of the last test

   To furnish the diverse requirements of our clients in the best possible manner we are involved in offering an extensive range of Fabric Thickness Gauge

Application

Crease Recovery Tester, to determining recovery properties of fabrics by creasing in a loading device for a predetermined time using a Weight suitable for the test method specified (BS/ISO/AATCC), After transferring the specimen to the clamp of the tester, the specimen is allowed to recover and the angle of recovery recorded.

Crease Recovery Tester (crease tester) is a totally manual operate.

Standards:



Weight: 5 Kg
Dimensions : 170x170x360 mm(LxWxH)

Digital ICI Pilling Tester consists of two wooden cubical boxes with inside surface lined with special standard cork sheet and outside surface beautifully laminates. These boxes are rotated about their central axis at a specified speed with the help of a geared motor. A pre-set digital counter stops the motor automatically after the desired number of revolutions.

Pilling is a fabric surface phenomenon characterized by little balls formed by entangled fibers clinging to the surface, these are formed during wearing or washing by the entanglement of the loose fibers, which protrude from the fabric surface, and development of these into spherical bundles anchored to the fabric by a few unbroken title. Ramp pilling tester helps to accurately replicate pilling on fabrics.

To fulfill the needs of our valuable clients, we are offering a wide range of quality oriented ATC Digital pH Meter that are useful where automatic temperature compensation (ATC) is required. To maintain the quality, these pH meters are manufactured under the supervision of vendors’ professionals. Our offered pH meters are highly appreciated for their optimum performance, superior quality and cost effectiveness.

Features:

• High efficiency
• Smooth functioning
• Easy to handle

Accessories:

• Stand with Clamp, Buffer Powder

Optional:

• pH Electrode end Temperature Probe

Specifications:

Crockmeter Motorised is used for the determination of color Fastness of textiles against rubbing under either DRY or WET condition.

Crock Meter Motorised is an advanced version of Crockmeter, which is operated by a geared motor. It consist of the Main Unit having an oscillating Arm with a Finger.

Which Rubs over the Test Specimen under a specified Load over the Test Specimen.

Specification:

• 16mm Finger- 1 No
• 25mm Finger-1 No. (For furnishing fabrics)
• S. Steel Spiral Clips- 2 Nos
• Crocking Cloths (5x5cm) - 500 Nos
• Blotting Papers - 2 Packet
• 22 Newtons Weight - 1 No. (For furnishing fabrics).
• Calibration Certificate

IT is used for testing fastness to dry heat of all kind of textiles which have stable size and shape. The fastness to hot pressing and to processing by hot roller of all kind of textile material, and strength damaged by chlorine. it is  composed by control panel , press board and the base board , controller by the microprocessor ; it is easy to set the parameter ,  when the actual temperature is lower the set temperature , the microprocessor thought the PID algorithm to control  the hitting device, and make it reaches to the set temperature.

This product is manufactured for use in the ISO 6330 tests. The powder containing fluorescent brightening agent and the formulation is tightly controlled to ensure it meets the specification of the ISO standard. This non-phosphate detergent powder is a completely homogeneous product, which ensures that batch to batch continuity is excellent, and promotes superior shelf life. Spray dried to ensure there is no risk of the product separating into its constituent parts, which removes the possibility of inconsistent results.

• Delivery Time: READY STOCKS
• Packaging Details: STANDARD PACKING SIZE 2 KG AND 15 KG

Conditioning Chamber to condition samples prior to testing. Completely adheres to the textile conditioning requirements of temperature 22+_ 2 degree Celsius & humidity 65+- 3%. Incorporate daylight / CWF light in the chamber and humidifier. complete with transparent viewing door and light to see the samples without disturbing the set conditions.

One of the most common measures of the quality of a fabric is the number of threads per unit length in both the warp and weft directions. In this apparatus, a motorized traveling microscope is used for viewing the weave of the fabric under test. Openings of known widths are provided to enable picks and ends per unit length to be determined both in Metric and Imperial Systems.
The base of the apparatus is meticulously finished in Metallic Blue Paint and all other Parts are made of Stainless steel for trouble free life long operations.

Specification:

• Fabric Can be Checked: 1/4inch, 1/2 Inch, 1 Inch, 20 mm, 50mm (Calibrated Slots)
• Digital Counter: 4-Digit Re-settable Digital
• Counter (Registers each increment with a Beep) – 0-9999, L/C: 1
• Microscope Magnification: 40x (10x eyepiece and 4x Objective Lens)
• Light Intensity Control: Variable light intensity
• A fine equipment to check the read/pick of any type of fabric conveniently and accurately
• 40x magnification with in-built reference line
• Calibration Certificate