Mesdan Fabrics Testing Instruments

Burstmatic can perform single bursting test, as well as series of multiple fatigue cycling test (hysteresis, analysis of specimen behavior when subject to cycling extensions and relaxations) on a single specimen, to verify either the distension at a preset pressure level, or vice versa. All burst tests performed with Burstmatic conform to the main international standards, and are preset or freely programmable to suit individual/custom made settings, in a very friendly/simple way my means of a touch screen panel.Full “stand alone” functioning by means of the touch screen; high data storage capability.Instrument endowed with an Ethernet communication port fora remote data exchange and management with a single PC or through the company intranet with servers.

Specification:

• Pneumatic instrument
• Pressure measure precision 0.001 bar
• Distension measured with laser
• Distension measuring accuracy 0.1 mm
• Compressed air filter set, code 338E.400
• Diaphragm rubber thick 1,5 mm reinforced up to 2 mm, set of 10 pcs, code 338E.142

• Delivery Time: 90 days

Martindale 2568_A Instrument for the control of wear and piling on all types of fabrics. Model with 9 positions with display LCD touch screen equipped with single and total rotation counter. Supplied with 2 sets of weights of 9 and 12 Packet. 3 type test: wear, pilling, linear.

Details:

• Standard Abradant Fabric (1.6x1m) Code 314.12
• Stand.Backing Foam (Pack of 25 pcs) Code 314.32
• Stand.Backing Felt disc o of 140mm (pack of 24 pcs) Code 314.8
• Stand.Felt disc o of 90 mm for Pilling test (pack of 24 pcs) Code 314.20
• Sample holder for Swiss Pilling test (EMPA) Code 2568.300
• Standard photographs SM50 for pilling test on woven fabrics (3x4 pieces) Code 314.14
• Standard photographs SM54 for pilling test on knitted fabrics (3x4 pieces) Code 314.16
• Standard photographs EMPA 991 (3x4 pieces) Code 314.18
• Standard photographs EMPA 992 (3x4 pieces) Code 314.24
• Sample cutter 38o mm Code 2560.322
• Sample cutter 90o mm Code 2560.324
• Sample cutter 140o mm Code 2560.320

Officially approved by Marks & Spencer for the following tests:

• Marks & Spencer P17 Pilling method P1
• Marks & Spencer P18C Enhanced Pilling
• Marks & Spencer P19 Martindale Abrasion Resistance of Apparel Fabrics
• Marks & Spencer P19A Martindale Abrasion Resistance of
• Handbags and Belt Fabrics
• Marks & Spencer P19B Martindale Abrasion Resistance of Upholstery
• Marks & Spencer P19C Martindale Abrasion Resistance for Shirtings.

TENSO LAB 5000 2515 Two-column universal electronic strength tester (CRE) developed to meet the high-quality testing requirements of universities, research institutes, and leading companies. With a maximum capacity of 5000 kg (50 kN), it is suitable to test also technical textiles, geo-textiles, non-woven and industrial textiles in general.

Twin ball screws ensure the smooth movement of the crossbar, sliding between two reinforced guide columns that prevent any deformation of the framework. Available a version 1000kg (10 kN) code 2516.

Developed to be used with a wide range of easily interchangeable load cells and clamps, both mechanical and pneumatic.
TensoLab 5000 is PC controlled. Thanks to the different operating software available, it can perform traction, compression, tearing, delamination, adhesion, seam slippage tests, and hysteresis cycles, according to specific international standards.
A Mechanical Extension Device is available as optional, for a further check of elongation on very rigid samples with low intrinsic elongation.

C.R.E. Available load cells:

• maximum capacity 2 daN (kg) Code 2510.276
• maximum capacity 10 daN (kg) Code 2510.280
• maximum capacity 100 daN (kg) Code 2510.282
• maximum capacity 500 daN (kg) Code 2510.283
• maximum capacity 1000 daN (kg) Code 2510.284
• maximum capacity 5000 daN (kg) Code 2510.288

ELMATIC 275D The only Elmendorf Tearing Tester on the market able to automatically perform the following operations:

• sample cut
• the release of the laceration pendulum
• reading of the laceration value
• blocking of the pendulum
• reset of the pendulum into the starting position
• Suitable for all kinds of apparel, technical and protective fabrics, as well as for paper, cardboard, natural and artificial leather.
• Model with a high laceration capacity, ranging from 1600 to 30.000 g. Pendulum complete with additional check weights, supplied as standard with the instrument.
• An instrument equipped with an alpha numeric keyboard and digital reader for the measurement of the laceration values that can be printed or transferred to a PC through an RS 232 serial port.
• Instrument fully protected and complying with the strictest EC safety norms.

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
• Delivery Time: 90 days

Crease Recovery Tester To determine recovery characteristics of fabrics undergoing a preset pressure for a determined period of time.